|
|
Infra-red CCTV Lighting Systems |
| |
Technical specifications
IL500
Illuminator lamp
Single power supply
Dual power supply
Dual regulator unit
Special power supplies
Waterproof box
Stoneguard
Mounting plates
Safety
Information
Ordering
information
Download
product information data PDF file (172K)
|
|
|
IL500
illuminator
|
Number
of LEDs:
|
504 |
|
Input
voltage:
|
Constant
current
2.5A full power
1.3A half power |
|
Output
voltage:
|
approx.
28vdc |
|
Dimensions:
|
215
x 145 x 70mm
(excluding bracket) |
|
Weight:
|
2.5kg |
|
Wavelength:
|
850nm
or 940nm |
|
Construction:
|
Aluminium
extrusion |
|
Cable
length:
|
4m
other available |
|
Beam
angle:
|
approximately
35 deg
variations
available please inquire
|
|
IP
rating:
|
IP66 |
|
|
|
| Ancillaries |
|
| Mounting
plates: |
for
pan and tilt single and dual are available |
| Stoneguard: |
6mm
polycarbonate to withstand stones and airgun pellets. |
|
|
|
|
chassis
only power supply unit
|
Single
power supply
An all
in one constant current power supply for powering a single illuminator
unit and may be supplied as either a chassis version (for dry cabinet
installation) or in a an IP66/67 weatherproof polycarbonate enclosure.
The enclosure
is normally supplied with four M16 cable glands to allow for power
in, lamp out, photocell and telemetry connections. Please state
the number of glands required (2 to 6).
A chassis
only version is available for dry cabinet installation.
| Input
voltage |
230/(110)*vac |
| Input
current |
0.45A
(230)*vac
0.9A (110)*vac
at approx 28vdc
|
| Output
current |
constant
current
2.5A (full power)
1.3A (half power)
|
| Photocell |
5v |
| Telemetry |
closed
= on |
| Dimensions |
230
x 140 x 95mm
excluding glands |
| Weight
|
approx
3kg |
*
to order
54vdc off load, approx 28vdc on load |
|
|
Dual
power supply
A basic
unregulated power supply unit which accepts 230vac (110*) mains
input and outputs unregulated 54vdc. This unit is designed to power
our dual regulator unit.
The dual
power supply unit has a simple telemetry switch connection which
allows the output voltage to be remotely turned on and off. This
feature may be useful should the camera telemetry unit be sited
near the unit.
The weatherproof
enclosure is normally supplied with three M16 cable glands to allow
for power in, power out and telemetry connections. Please state
the number of glands required (2 to 6).
A chassis
only version is available for dry cabinet installation.
| Input
voltage |
230/110vac |
| Input
current |
0.9A
(230vac)
1.8A (110vac) at approx 54vdc |
| Telemetry |
closed
= on |
| Dimensions |
205
x 120 x 75mm
( chassis excluding glands)
|
| Weight |
approx
3kg |
|
|
 |
Dual
regulator unit
This dual channel constant current regulator unit supplies two illuminator
units. Each circuit is independently regulated with either full or
half power settings. There is a common input line (from the
dual power supply) and a single photocell twilight circuit which
operates both channels.
This
unit may be mounted on the pan and tilt dual mounting plate with
the photocell mounted directly on the box. The unit is supplied
with four M16 cable glands to allow for power in, two power outputs
and one photocell.
| Input
voltage |
32
- 60vdc |
| Output
current |
constant current
2.5A (full power)
1.3A (half power) |
| Dimensions |
180
x 110 x 57mm |
| Weight
|
approx
600g |
|
|
|
Special
power supplies
If you have a specific design requirement, we will be happy to discuss
the design and manufacture of custom units.
Waterproof
box 3 or 4 gland
| Dimensions |
230
x 140 x 95mm |
| Weight |
approx
600g |
Stoneguard
Shatterproof 6mm polycarbonate
Mounting
plates
Two types of mounting plate are available to suit either one or
two IL500 illuminators.
Double
plate
| Dimensions |
700
x 176 x 3mm |
| Lip
depth |
17mm |
| Weight |
1.15kg |
Single
plate
| Dimensions |
420
x 176 x 3mm |
| Lip
depth |
17mm |
| Weight |
0.7kg |
Various
holes have been incorporated into each plate to allow for the fitting
of different camera housings and a dual power unit.
|
 |
Safety
information
The IL500
is classified a Class 1 LED product in accordance with BS-EN-60825-1
(2001) There are no harmful effects and eye protection does not
have to be worn.
Do not
stare into the product at close range for long periods of time and
do not prolonged exposure to eyes at close proximity.
|
|
 Product
information Technical
specifications Application/Design
notes
Fequently asked questions
Web links
Oxley Capabilities |
|
If you would
like to request brochures or have any comments or questions, please
use our Enquiry Form. |
|
|
